What is the difference SKF bearings with grease or oil lubrication

Web Design And Seo For www.china-webdesign.com

ball bearing - China Manufacturer

Thank you for inquiry my ball bearing, Tel : 0086-0379-64390888, E-mail: liuping@lyzyc.cc

http://www.lyzycbearing.com/

Correct choice of lubricant and lubrication method use reasonable and appropriate to control the the lubricant number of key imports bearing life. Qingdao axis of fine today and

share with SKF bearings with grease or oil lubrication difference.gri nding spindle

SKF bearing oil or fat based on what is it

, SKF bearing lubricating oil:

Under certain operating specification, the use of significantly smaller in the lubricating oil starting torque and friction losses.

Since the lubricating oil heat away to a cooling effect in the cycle, so that the imported bearings to achieve a relatively high rotational speed.

The lubricants can guarantee to achieve relatively high use temperature.roller ball bearing

Imported bearing lubricating oil in the gear box is very appropriate, because the oil is at the same time to achieve the purpose of lubricating gears and imported bearings

splash.

Imported bearings in grease gradually wear the product, abrasive, from the outside, after sealing device penetration and aging products, stains, if not replaced in a timely

ma nner, the cause accelerated wear of imported bearings, and the application of liquid lubricant, After filtration to ensure their normal.double row ball bearing

Operation.

SKF bearing grease lubrication:

SKF frequent refueling bearings shall be by hand, such as switching to fat not only save trouble and avoid accidents caused due to lack of oil.

The role of fat itself is sealed, allows a high degree of sealing institutions to simplify the design purpose.

Experience has shown that in a certain speed range (n <20000r/min dn <20000mm r / min) with lithium grease lubrication lower temperature rise and longer than the drop of oil

imports bearing life.

The basic characteristics and selection of the grease grease general criteria in the choice of grease must select and use conditions (temperature, speed, load, and

environmental, etc.) adapted to the grease, the basic characteristics of the grease, while the lubricating Basic characteristics of the lipid depends on the thickening agent

And the kind of the base oil.