Brief pneumatic diaphragm pumps in the practical field of six

Web Design And Seo For www.china-webdesign.com

ball roller bearing - China Manufacturer

Thank you for inquiry my ball roller bearing, Tel : 0086-0379-64390888, E-mail: liuping@lyzyc.cc

http://www.lyzycbearing.com/key-roller-ball-bearings-9/

Pneumatic diaphragm pump is a new type of transportation machinery, and is currently the most innovative pumps. Using compressed air as a power source for all kinds of corrosive

liquid, with particles of liq uid, high viscosity, volatile, flammable, poisonous liquid can be pumped optical exhaustion. NTN bearig
This article main About 6 large role in the practical field of pneumatic diaphragm pumps:

1, due to using air as a driving force, so the flow rate with the variation of the back pressure (outlet resistance) is automatically adjusted suitable for high viscosity

fluids. Centrifugal pump operating point is based on water as the base set good for slightly higher viscosity of the fluid, you need supporting reducer or frequency conversion

Governor, the cost will be greatly improved, the gear pump is the same.engine bearings

2, pneumatic diaphragm pump pneumatic pump used in an explosive atmosphere reliable and low cost, such as fuel, gunpowder, explosives transportation, because: first, grounded

not produce sparks; Second, no heat generated , the machine does not overheat;, the fluid does not overheat because

The diaphragm pump fluid agitation minimum.thrust roller bearings

Bad site, such as construction sites, industrial and mining wastewater emissions, due to impurities in the wastewater and complex composition, piping tend to clog, so excessive

load on the electric pump, motor fever vulnerable. By particles and flow adjustable pneumatic diaphragm pumps, pipe

The channel blocked automatically stop until smooth.

4, another pneumatic diaphragm pump small size, easy to move, no foundation, and a very small footprint, easy to install and economy. The pump can be used as a mobile material.

In a hazardous, corrosive materials handling, diaphragm material with the outside world completely separated.

6, pneumatic dia phragm pump can be used for transporting relatively unstable chemical nature of the fluid, such as: the photosensitive material, flocculation liquid. This is

because the shearing force of the diaphragm pump is low, the physical impact on the material is small.

Pneumatic diaphragm pumps in the industrial field is huge, difficult human hand-finished by pneumatic diaphragm pumps to complete indirect ensure staff safety.