SKF Bearing rust prevention methods and treatment

Web Design And Seo For www.china-webdesign.com

thrust ball bearing - China Manufacturer

Thank you for inquiry my thrust ball bearing, Tel : 0086-0379-64390888, E-mail: liuping@lyzyc.cc

http://www.lyzycbearing.com/key-thrust-ball-bearings-41/

An immersion method: using a number of small import bearing soaked in anti-rust grease, oil film thickness by controlling the temperature or viscosity of the antirust oil to achieve. Antirust oil to the surface layer on the adhesion.

2, the method of brushing: Brush attention to uniform smear the surface of the imported bearings, do not produce accumulation and pay attention to prevent leakage Tu.angular contact ball bearing

3, the spray method: some large rust-proof material not suitable for immersion oiling, usually with about 0.7Mpa pressure filtration of compressed air to spray the air clean place. The spray application of the diluted anti-rust oil or a thin layer of anti-rust oil. This method must be used to improve fire safety and labor protection measures.china bearing

SKF bearing surface rust pretreatment methods:

A surface cleaning: cleaning must be combined with the nature of the imported bearing surfaces and conditions. Commonly used methods are solvent cleaning method, the method of mechanical cleaning and chemical treatm ent of cleaning method.thrust bearing

2, available filtering surface is dry and clean dry compressed air. Or use the dryer, the drying temperature of 120 ~ 170 ℃, and finally dry with a clean gauze.