Better maintenance of the preventive measures of angular contact ball bearings

Web Design And Seo For www.china-webdesign.com

china bearing company - China Manufacturer

Thank you for inquiry my china bearing company, Tel: 0379-64331653, E-mail: info@lyvsg.com

http://www.lyvsg.com/key-china-bearing-company-26/

Power operation, start from no-load low-speed, slowly increased to the conditions stipulated in the rated operation. Test run to check the matters, whether there is abnormal sound, angular contact ball bearing temper ature changes, lubricant leakage or discoloration. If abnormal, should be immediately discontinued operation, check the mechanical, if necessary, to remove the bearing check.
(1) to maintain a clean bearing lubrication
    INA Bearing, a check should first clean the bearing surface, then carefully check the bearing oil seal and the surrounding parts have shown undesirable symptoms, be sure to replacing bad oil seal can cause damage, so that the angular contact ball bearing cloud is not normally caused by equipment downtime.china ball bearing
Note that the coverage of exposed bearing
    Check the INA Bearing Do not let the bearings are exposed to contaminants or moisture environment. If the interruption of work should be based on the greaseproof paper of plastic sheeting or similar material to cover once the machine. Cleaning the exposed bearings without disassembling the case may perform a check, coated with a petroleum solvent cleaning to coating with the brush, then dry with a lint cloth or compressed air dryer (be careful not to let bearing assemblies starting rotation). Kind of probe used by a small mirror and similar dentist to check the track surface of the bearing retainer and beads. Not cleaning encryption cover or dust bearing; wipe the external surface can be. If the bearing was damage to the circumstances that need replacing. Than array bearing damage selected as the sudden stop loss much more economical to replace the angular contact ball bearings in the regular downtime and maintenance period.ball bearing company
Check bearing lubricant
The lubricant is very important not only for the bearing, but also for all the bearings. Note, however, the bearing should not add too much grease. Then is to replace the INA bearing lubricant. Oil lubricated angular contact ball bearings diarrhea in addition to the old oil, if possible, should no longer be poured into the fresh oil and let it rotate a few minutes at low speed. As much as possible so that the oil to the collection of residual contaminants, and then diarrhea among these oil. The use of grease lubricated bearings in the replacement of grease used Joe in addition to the device should be avoided with a cotton material come into contact with any part of the bearing. Because these residual fibers may be wedged in between the rolling elements and cause damage, especially bearing applications should pay more attention to this problem.ball bearing manufacturer