Use angular contact ball bearing radial clearance

Web Design And Seo For www.china-webdesign.com

deep groove ball bearing - China Manufacturer

Thank you for inquiry my deep groove ball bearing, Tel: 0379-64331653, E-mail: info@lyvsg.com

http://www.lyvsg.com/key-deep-groove-ball-bearing-8/

Demolition bearing into gasoline cleaning, wipe away the residual sludge and dust on the angular contact ball bearings, where rust bearings are polished metallographic sandpaper gently wipe until the touch with no rough sense so far .china bearing company
Then bearing after cleaning with a dry rag to wipe dry, then add the anti-rust oil soaked. During this process, to the bearing completely in contact with the anti-rust oil, and non-stop rotation of the angular contact ball bearings, so as to make the rust preventive oil forming the film covering the surface of the bearing to achieve the purpose of rust.
Third step lithium grease or butter, need to be evenly coated on the surface of the bearing, including the inner and outer rings, wheels, cage. And side wiping edge rotating bearings, so that the butter really into the bearing internal play the role of sufficient lubrication.
The fourth step is also the last one process is the packaging. Back on the shelves in order to save costs, we are "turning waste into treasure, and scrap warehouse, cut into the right size bags for cement packaging bags, bearing tight package, wrapped, marked the good angular contact ball bearings specifications store.
Disassembly of the bearing with the same installation carefully. Note that does not damage the bearings, and parts, especially the interference fit bearing disassembly operation is difficult. So, at the design stage to consider in advance to facilitate the dismantling, demolition tools needed design is also very important. Demolition methods based on drawings study disassembly sequence, survey angular contact ball bearings with conditions, in order to achieve the demolition job foolproof.