To choose Miniature Bearings five strokes and skills to cope with the stable operation

Web Design And Seo For www.china-webdesign.com

roller bearing co - China Manufacturer

Thank you for inquiry my roller bearing co, Tel: 0379-64331653, E-mail: info@lyvsg.com

http://www.lyvsg.com/key-roller-bearing-co-22/

In order to be able to achieve the state of the axis (rotation) transfer load and limited movement relative to the basic tasks of the position of the bearing block (stationary system), played a key role in the bearing. The role of the mating with the miniature bearing is such that the stationary ring and the rotating ring of the bearing can be separately combined with the mounting parts of the bearing housing (stationary part) and the shaft (rotating portion) close.china bearing
Either in the shaft or in the bearing block, miniature bearings are required to fix its position in three directions, such as radial, axial and tangential direction. The radial and tangential positioning is achieved by the tight fit of the bearing rings, the axial positioning, however, only in a few cases a tight fit;
For use in miniature bearings, how to ensure stable operation? Today will introduce five strokes using skills:
Bearing clearance should be appropriate, too large an impact, too small, poor lubrication, may cause bush-burning;
Second, the bearing and journal surface quality and geometry should strictly be guaranteed;
Third, to improve the quality of the bearing lubrication, and to control the pressure, temperature and flow rate of the oil, strengthening the oil filter;
Undercooling and overheating cases of miniature bearings are unfavorable, so you want to control the temperature state of the diesel engine. Cold weather, diesel engine starting should be preceded by warm-up, and the hand rotating crankshaft oil into the friction surface.
The compliance of fuel and lubricants.
Do use more than five points, miniature bearings running effect will be a corresponding increase.